Brief Analysis of Casting Process of Aluminum Rod Casting

【China Aluminum Network】 Casting of aluminum rods includes melting, purification, impurity removal, degassing, slag removal, and casting. The main process is:

1. Ingredients: Calculate the amount of each alloy component to be added according to the specific combined prize number that needs to be produced, and properly match various raw materials.

2. Smelting: The prepared raw materials are added into the smelting furnace according to the process requirements to be melted, and the impurities and gases in the melt are effectively removed through degassing and deslagging refining means.

3. Casting: The smelted aluminum liquid is cooled and cast into a variety of round cast rods through a deep well casting system under certain casting process conditions.

Aluminum and aluminum rods: Aluminum is a light metal, and its compounds are widely distributed in nature. The aluminum resources in the earth's crust are about 400 to 50 billion tons, second only to oxygen and silicon, and it is the third largest. Among the metal species, second only to steel, it is the second largest metal. Aluminum has special chemical and physical properties. It is not only light weight and firm in texture, but also has good ductility, electrical conductivity, thermal conductivity, heat resistance and nuclear radiation resistance. It is an important basic raw material for the development of the national economy. Dongguan aluminum rod aluminum is a very rich metal element on the earth, and its reserves rank second in the metal. By the end of the 19th century, aluminum had emerged as a competitive metal in engineering applications and it was popular. The development of aviation, construction, and automotive three important industries requires that the material properties have the unique properties of aluminum and its alloys, which greatly benefits the production and application of this new metal, aluminum.

The aluminum rod is a kind of aluminum product. The casting of the aluminum rod includes melting, purification, impurity removal, degassing, slag removal, and casting.